Notice: Undefined index: pf_7_5 in /srv/designsociety.org/nordic/AMagdic/Models/Publications.php on line 124
SIG-Library / The Design Society

SIG-Library

Query returned 308 results.

Efficient Module Design for Chassis-Mounted Components of Commercial Vehicles

Stocker, Johannes; Çavuşoğlu, Mesut; Felgenhauer, Matthias; Lienkamp, Markus // 2018
Commercial vehicle manufacturers have to offer mass customized products in order to serve a wide range of customers from various industries respectively their applications. Since each branch has ...

EMPIRICAL STUDY OF REQUIREMENTS ENGINEERING IN CROSS DOMAIN DEVELOPMENT

Nilsson, Sara; Buffoni, Lena; Sandahl, Kristian; Johansson, Hanna; Tahir Sheikh, Bilal // 2018
Shortened time-to-market cycles and increasingly complex systems are just some of the challenges faced by industry. The requirement engineering process needs to adapt to these challenges in order to ...

EXECUTABLE COST-SENSITIVE PRODUCT DEVELOPMENT OF A SELF-BALANCING TWO-WHEEL SCOOTER WITH GRAPH-BASED DESIGN LANGUAGES

Wünsch, Fabian; Ramsaier, Manuel; Breckle, Theresa; Stetter, Ralf; Till, Markus; Rudolph, Stephan // 2018
This paper deals with the integration of cost considerations into the technological design process of a product. As an example serves a self-balancing two-wheel scooter. The design process of that ...

EXPERIENCES WITH 'DIRECT PRODUCT FEEDBACK' IN COURSES ON ENGINEERING DESIGN

Sauer, Thorsten; Voß, Markus; Bozkurt, Hulusi; Nutzmann, Marc // 2018
The article reflects student learning experiences with open-ended problems in an Engineering Design project by presenting a questionnaire-based survey that was conducted in a course held during the ...

GEOMETRIC SUBSTITUTE MODELS FOR EFFICIENT SCALING OF DIMENSIONS DURING VEHICLE ARCHITECTURE DESIGN

Felgenhauer, Matthias; Angerer, Christian; Marksteiner, Raul; Schneider, Florian; Lienkamp, Markus // 2018
The scaling of component sizes and distances between them, during the early stage of Vehicle Architecture Design, is time- and cost-consuming, due to numerous requirements as well as component and ...

INDUSTRY-LED CORPORATE START-UP ACCELERATOR DESIGN: LESSONS LEARNED IN A MARITIME PORT COMPLEX

Garcia-Herrera, Cristobal; Perkmann, Markus; Childs, Peter R. N. // 2018
Given the increasing disruption in every industry, firms can design new interfaces to further their strategic exploration efforts in order to remain competitive. Based on an inductive multi-case ...

INTRODUCING AN EVALUATION FRAMEWORK FOR WEARABLE DEVICES DESIGN: EXPLAIN REASONS OF LOW USER ADOPTION

Wang, Yahui; Yu, Suihuai; Wang, Jinlei; Ma, Ning; Liu, Zhuo // 2018
We summed up the factors and attributes affecting the success of smart wearable product design. We analysed the relations between design intention and cognitive interpretation and presented the ...

KNOWLEDGE IN ENGINEERING DESIGN: A SYSTEMATIC LITERATURE REVIEW ON ARTIFACTS AND IT SYSTEMS

Preidel, Maurice; Wang, Wei Min; Exner, Konrad; Stark, Rainer // 2018
Intense collaboration within networks of stakeholders characterizes current engineering design processes. In these, engineers use IT systems to create artifacts, which manifest their knowledge ...

ROBOT ERGONOMICS: TOWARDS HUMAN-CENTRED AND ROBOT-INCLUSIVE DESIGN

Sosa, Ricardo; Montiel, Miguel; Sandoval, Eduardo B.; Mohan, Rajesh E. // 2018
This paper presents a cross-disciplinary approach to the design of robots and the designed environments they will inhabit and the objects they will operate in applications of social and service ...

Scaling agile practices on different time scopes for complex problem solving

Breitschuh, Jan; Albers, Albert; Seyb, Patrick; Hohler, Sophie; Benz, Jonathan; Reiß, Nicolas; Bursac, Nikola // 2018
There can be no innovation without time and space for ideation and courage to endeavor new terrain. Approaching this terrain in a structured way whilst managing the risks linked to the uncertainty of ...

TEACHING DRAWING BASED ON THE DESIGN PROCESS - EXPLORING CREATIVITY

Anelise Zimmermann, Solange Coutinho // 2018
The teaching of drawing in BA Graphic Design courses in Brazil is frequently associated with paradigms mainly based on the development of technical skills. However, studies into drawing reveal it to ...

THE IMPLEMENTATION OF AN INDUSTRIAL ROBOT DESIGN TEMPLATE FOR CUSTOMER PARTICIPATION DESIGN

Li, Jing; Nie, Yafei; Zhang, Xinwei; Wang, Keqin; Tong, Shurong; Eynard, Benoît // 2018
Customer participation design plays an important role in achieving high degree of customization. Complex product such as robot has complicated structure and strong professionalism, the design is hard ...

THEORETICALLY COMPARING DESIGN THINKING TO DESIGN METHODS FOR LARGE-SCALE INFRASTRUCTURE SYSTEMS

Miguel Andres Guerra, Shealy Tripp // 2018
Design of new and re-design of existing infrastructure systems will require creative ways of thinking in order to meet increasingly high demand for services. Both the theory and practice of design ...

TOWARDS MEASURING AESTHETICS IN THE CLASSROOM: A CROSS-CULTURAL TRANSLATION AND ADAPTATION OF AN AESTHETIC PLEASURE SCALE IN DESIGN

Garrido, Luis Miguel; Maya, Jorge // 2018
Measuring complex constructs has always been a big challenge for researchers and educators; aesthetic pleasure is not the exception. Many scales have been proposed but with limited validity and ...

TOWARDS SYSTEMATIC INCONSISTENCY IDENTIFICATION FOR PRODUCT SERVICE SYSTEMS

Basirati, Mohammad R.; Zou, Minjie; Bauer, Harald; Kattner, Niklas; Reinhart, Gunther; Lindemann, Udo; Böhm, Markus; Krcmar, Helmut; Vogel-Heuser, Birgit // 2018
Value shift towards services led to emergence of product-service systems (PSS) as intertwined products and services. PSS development requires collaborating teams with higher domain diversity to ...

USING THE POTENTIALS OF ADDITIVE MANUFACTURING BY A SYSTEMATIC LINKAGE OF THE MANUFACTURING PROCESS TO PRODUCT DESIGN

Würtenberger, Jan; Reichwein, Jannik; Kirchner, Eckhard // 2018
This paper shows a way for a systematic linkage of knowledge about additive manufacturing to the development process using a design pattern matrix. The potentials of additive manufacturing are ...

A method for the expert-based identification of engineering change propagation

Kattner, Niklas; Mehlstäubl, Jan; Becerril, Lucia; Hollauer, Christoph; Weidmann, Dominik; Lindemann, Udo // 2017
Handling engineering changes effectively becomes more and more important for the performance of the overall design process. Therefore, it is crucial to assess the propagation of engineering changes ...

A qualitative study to identify the need and requirements on further development of design guidelines for fibre-reinforced composites

Butenko, Viktoriia; Wilwer, Jürgen; Spadinger, Markus; Albers, Albert // 2017
This paper describes the methodological approach and results of a qualitative study used to identify the needs and requirements on the further development of design guidelines for fibre-reinforced ...

ALIGNING ASSESSMENT RESULTS WITH LEARNING OUTCOMES

VOß, Markus; BOZKURT, Hulusi; SAUER, Thorsten // 2017
Competence-based education concentrates on learning outcomes instead of meticulously prescribing what to learn. A major problem for many lecturers and programme directors today is the lack of ...

An approach to handle uncertainty during the process of product modelling

Würtenberger, Jan; Lotz, Julian; Freund, Tillmann; Kirchner, Eckhard // 2017
Product models are the results of product modelling and are used for decision making during the development process. They are based on assumptions by the designer, which are made under a lack of ...

Anwendung des Data Mining zur Ableitung eines effizienten Produktfamilien-portfolios  (Members only )

Ole Jan, Meßerschmidt; Thomas, Gumpinger; Timo, Neuhäußer // 2017
Companies want to meet the requirements of as many heterogeneous customers as possible on the one hand and offer a small variety as possible to save costs on the other hand. To resolve the resulting ...

Bridging the semantic gap in customer needs elicitation: a machine learning perspective

Wang, Yue; Zhang, Jian // 2017
The elicitation of customer needs (CNs) is a critical step in product development. However, these needs are often expressed in ambiguous, simple language and not in the form of well-defined ...

Calculation of design cognitive features based on complex linkography-network

Xu, Jiang; Chuai, Ying; Wang, Xiuyue; Sun, Gang // 2017
In view of the complexity of multi-disciplinary team collaborative innovation design process, the quantitative design of cognitive research can be realized by putting forward to deconstruct design ...

CULTURE SENSITIVE CONTEXTMAPPING: DISCOVERING THE STRENGTHS OF EASTERN AND WESTERN PARTICIPANTS

Hao, Chen; van Boeijen, Annemiek; Stappers, Pieter Jan // 2017
Contextmapping - a set of generative design techniques, used by designers to understand the context of their intended users - has been used successfully over a decade with Western participants, both ...

Boolean Searches

The following examples demonstrate some search strings that use boolean operators:

  • design community
    Find rows that contain at least one of the two words.
  • +design +community
    Find rows that contain both words.
  • +design community
    Find rows that contain the word “design”, but rank rows higher if they also contain “community”.
  • +design -community
    Find rows that contain the word “design” but not “community”.
  • +design ~community
    Find rows that contain the word “design”, but if the row also contains the word “community”, rate it lower than if row does not.
  • +design +(>community <decisions)
    Find rows that contain the words “design” and “community”, or “design” and “decisions” (in any order), but rank “design community” higher than “design decisions”
  • design*
    Find rows that contain words such as “design”, “designs”, “designing”, or “designer”.
  • "some words"
    Find rows that contain the exact phrase “some words” (for example, rows that contain “some words of wisdom” but not “some noise words”). Note that the " characters that enclose the phrase are operator characters that delimit the phrase. They are not the quotation marks that enclose the search string itself.

Please sign in to your account

This site uses cookies and other tracking technologies to assist with navigation and your ability to provide feedback, analyse your use of our products and services, assist with our promotional and marketing efforts, and provide content from third parties. Privacy Policy.