Query returned 403 results.
Design for robustness - Systematic application of design guidelines to control uncertainty
Freund, Tillmann; Würtenberger, Jan; Lotz, Julian; Rommel, Carmen; Kirchner, Eckhard // 2017
In Robust Design literature, the application of Robust Design guidelines is suggested as a measure to obtain a design that is more insensitive against variations. But it lacks a detailed and ...
Differences between the discerning and opportunistic mind-sets in design learning
Hamat, Basyarah; Eisenbart, Boris; Schoormans, Jan; Badke-Schaub, Petra // 2017
Design learning can be improved by understanding the differences between individual characteristics of students and its connection with their learning processes and outcomes. This paper focusses on ...
Digital representation of product functions in multicopter design
Ramsaier, Manuel; Holder, Kevin; Zech, Andreas; Stetter, Ralf; Rudolph, Stephan; Till, Markus // 2017
In recent years the research concerning the representation of product functions has intensified again. Current studies exhibit a growing interest of design engineers to apply such representations in ...
DOES THE IMITATION OF THE SKETCH STYLE OF GOOD INDUSTRIAL DESIGNERS INFLUENCE STUDENTS’ DRAWING SKILLS?
Corremans, Jan A.M.; Coppieters, Werner // 2017
The importance and value of hand drawing and sketching activity in the early stages of the design process has already been extensively argued. Ideation sketches are used as a source of inspiration ...
Entscheidungsheuristiken in der PGE - Produktgenerationsentwicklung (Members only )
Nikola, Bursac; Simon, Rapp; Albert, Albers; Jan, Breitschuh; Narucha, Tanaiutchawoot // 2017
Product development always includes the selection of ideas from a set of potential ideas and thus pointing the way for the subsequent process. Doing this intuitively always implies the risk of not ...
Expert based approach to analyse and influence indirect cost of engineering changes
Schmied, Christian; Gebhardt, Marcel; Mörtl, Markus; Lindemann, Udo // 2017
Indirect cost of engineering changes represent increasing challenges for companies. Their high frequency and complex cost impacts makes it difficult to estimate and influence the cost outcomes. ...
Extended target weighing approach - Identification of lightweight design potential for new product generations
Albers, Albert; Revfi, Sven; Spadinger, Markus // 2017
In the development process of vehicles, especially electric vehicles, lightweight design becomes more and more important. Lightweight design efforts often result in increasing costs of a product and ...
Gathering and analysing external influences on the product design - a case study
Kammerl, Daniel; Echle, Stefan; Mörtl, Markus // 2017
The early phase of each development process is characterised by severe decisions under great uncertainty. To facilitate these decisions, it is crucial to know the (external) influences on the product ...
Generic generative design systems to imprint personalities in consumer products: Preliminary results
Beghelli, Alejandra; Briede, Juan; Carrasco, Miguel; Prieto, Pablo // 2017
Generative design is a computer aided design system that automatically or semi-automatically produces design solutions. Generative design systems help designers to save time and labor during the ...
Graph-based similarity analysis of BOM data to identify unnecessary inner product variance
Schmidt, Michael; Gehring, Benedikt; Gerber, Jan-Sebastian; Stocker, Johannes Michael; Kreimeyer, Matthias; Lienkamp, Markus // 2017
This paper contributes to the fields of variant management and product family design. The focus lies on analysing historically grown product portfolios in order to reduce unnecessary inner variety. ...
Holistic approach for design and re-design of production units
Stäbler, Markus; Weber, Jakob; Paetzold, Kristin; Vielhaber, Michael // 2017
This paper presents a novel approach to enable change within the life cycle of a production unit and enhance the usability of a re-design and change process by consistent interaction between the ...
Human-centred design blending smart technology with emotional responses: Case study on interactive clothing for couples
Weizhen, Wang; Nagai, Yukari; Yuan, Fang // 2017
Following the further development of the Internet of Things (IoT), rapid dissemination of smart clothing will begin. Previously, researchers have generally focused on high-tech approaches to ...
Investigating usage data support in development processes - A case study
Höhn, Manuel; Hollauer, Christoph; Wilberg, Julian; Kammerl, Daniel; Mörtl, Markus; Omer, Mayada // 2017
The design of new product development processes which integrate customer perspective promises great potential regarding rising volatility of external influences, shorter product life cycles and ...
Matrix-based system modelling to predict properties change propagation
Luedeke, Tobias; Kaspar, Jerome; Meiser, Philip; Schneberger, Jan-Henrik; Herrmann, Hans-Georg; Vielhaber, Michael // 2017
A significant shorter pre-development time in the automotive industry without physical prototypes due to a quicker generation of concepts is key to reduce development cost and to reach a higher ...
Modeling product co-consideration relations: A comparative study of two network models
Sha, Zhenghui; Wang, Mingxian; Huang, Yun; Contractor, Noshir; Fu, Yan; Chen, Wei // 2017
Customers often compare and evaluate alternative products before making purchase decisions. Understanding customer preference is an important step for choice modeling in engineering design. This ...
Modularization: Exploring opportunities for knowledge transfer between the mechanical engineering and construction industry
Kohl, Markus; Wilberg, Julian; Tommelein, Iris; Pikas, Ergo; Lindemann, Udo // 2017
Lean thinking is an example that shows how innovation in the manufacturing industry also leads to improvements in the construction industry. Modular product design is common in mechanical ...
Optimierung der Verbindungsstellen von Sandwichstrukturen mit additiv gefertigtem Kern (Members only )
Johann, Schwenke; Jan, Oltmann; Dieter, Krause // 2017
In fiber composite structures failure often occurs at the load introduction. Therefore, these points are reinforced by the addition of material, which how-ever increases component weight. The paper ...
Process model for change management in the system of chassis-mounted parts of commercial vehicles
Stocker, Johannes Michael; Thoma, Christoph; Schmidt, Michael; Kreimeyer, Matthias; Lienkamp, Markus // 2017
Due to the high amount of interrelations, such as spatial dependencies, material exchange, energy transfer and information flow, the chassis-mounted parts, located between the axles of a commercial ...
Systematische Effektorentwicklung für die automatisierte Handhabung techni-scher Textilien (Members only )
Marvin, Richrath; Michael, Brink; Jan, Franke; Klaus-Dieter, Thoben // 2017
This paper presents a methodological approach for the development of handling units for technical textiles. Virtual and experimental product devel-opment steps supplement the product development ...
Usability of processes in engineering design
Becerril, Lucia; Stahlmann, Jan-Timo; Beck, Jesco; Lindemann, Udo // 2017
Processes in Engineering Design are generally optimized towards efficiency, quality, costs, risks, etc., however an analysis that includes requirements from the process users' view is missing. Within ...
Using point cloud technology for process simulation in the context of digital factory based on a systems engineering integrated approach
Salehi, Vahid; Wang, Shirui // 2017
Currently, there is a huge potential to improve the digital factory information by using a 3D scanner to build up the digital factory environment. The results of the scanning process are point clouds ...
15 Years of SPALTEN Problem Solving Methodology in Product Development
Albers, Albert; Reiß, Nicolas; Bursac, Nikola; Breitschuh, Jan // 2016
The brain has only limited ability to deal with complex Problems. Therefore, the developer must be supported to supplement his natural problem-solving behaviors. The SPALTEN-Methodology was described ...
3D printing and applications: academic research through case studies in Finland
Flores Ituarte, Ińigo; Huotilainen, Eero; Mohite, Ashish; Chekurov, Sergei; Salmi, Mika; Helle, Jukka; Wang, Meng; Kukko, Kirsi; Bjorkstrand, Roy; Tuomi, Jukka; Partanen, Jouni // 2016
This research presents a comprehensive view of 3D printing technologies and their evolution. Additionally, it provides a Nordic perspective on the topic by summarizing project based research ...
A BRIEF INTRODUCTION ON THE KINEMATIC SCHEME DESIGN TEACHING SOFTWARE FOR MECHANICAL SYSTEMS
Qian, Feng; Dong, Huimin; Wang, Delun; Cui, Yan; Gao, Yuan // 2016
Kinematic scheme design is the beginning of the mechatronic system design, which is the most
important and difficult for junior students in mechanical engineering education. In this paper, the ...
Boolean Searches
The following examples demonstrate some search strings that use boolean operators:
- design community
Find rows that contain at least one of the two words. - +design +community
Find rows that contain both words. - +design community
Find rows that contain the word “design”, but rank rows higher if they also contain “community”. - +design -community
Find rows that contain the word “design” but not “community”. - +design ~community
Find rows that contain the word “design”, but if the row also contains the word “community”, rate it lower than if row does not. - +design +(>community <decisions)
Find rows that contain the words “design” and “community”, or “design” and “decisions” (in any order), but rank “design community” higher than “design decisions” - design*
Find rows that contain words such as “design”, “designs”, “designing”, or “designer”. - "some words"
Find rows that contain the exact phrase “some words” (for example, rows that contain “some words of wisdom” but not “some noise words”). Note that the " characters that enclose the phrase are operator characters that delimit the phrase. They are not the quotation marks that enclose the search string itself.